City and Guilds – Programmable Logic Controllers

City & Guilds – Programmable Logic Controllers: (Typically covering Siemens S7, Allen Bradley and Mitsubishi)

PLC Training Course Description

Are you wondering how to program a PLC?  We have an extensive range of PLC training courses available covering all PLC manufacturers and levels of expertise from the complete novice to the advanced. ALL of our training courses can be tailoured to your own requirements.

ALL our courses will be based on the relevant software and hardware. We aim to make ALL our courses as practical as possible, leading to ‘real world’ skills and not just theoretical skills.

No prior knowledge is required for this course as it starts from scratch and assumes no previous experience, you will reach the skilled level where you can look at becoming a programmer, get into engineering maintenance in an industrial environment, fault find or make amendments to programs, this is the course for you.

The ‘Typical’ 5 day course usually covers 2 or 3 of the major manufacturers, Siemens S7, Allen Bradley and Mitsubishi (This can be amended to other manufacturers if you have a particular requirement). The course aims to be 90% practical, as we believe the easiest way to learn is to do it! Every student works on their own dedicated training rig and computer, enabling you to get the most from the course. A full set of course notes and a USB drive full of other manuals is provided at the end of the course.

We can also cover a wide range of manufacturers including :

  • Siemens Step 5 PLC Training (Using Step 5, Quadriga or Others)
  • Allen Bradley PLC 3 & 5 Training (AB6200 Software)
  • RSLogix 5 PLC Training
  • SLC PLC Training (RSLogix 500)
  • ControlLogix PLC Training (RS Logix5000)
  • MicroLogix PLC Training (RSLogix 500)
  • S7-200 PLC Training (Step 7 Micro)
  • S7-300 PLC Training (Step 7 or TIA Portal)
  • S7-400 PLC Training (Step 7 or TIA Portal)
  • Kuhnke PLC Training (Kubes)
  • Omron PLC Training (Syswin)
  • Modicon PLC Training (ProWorx and Others)
  • Mitsubishi PLC Training (Medoc, GX Developer, GPP & Others)
  • Toshiba PLC Training
  • GE Fanuc PLC Training
  • Telemecanique PLC Training
  • Most other PLC manufacturer training undertaken.

We also cover a wide range of SCADA Systems to enable engineers to modify and add to existing screens, fault find through systems, set up communications etc. This is covered separately on our SCADA courses –

The Tutors for your PLC Training Course:

Our Tutors are qualified, highly experienced, enthusiastic, knowledgeable and  extremely friendly, you can take full advantage of all the tips of the trade, personal experiences and practical advice they offer. This short theory course is intensive, but no compromise is made on the course content.  The atmosphere is relaxed and enjoyable which creates a good learning environment.

PLC Course Overview

Receive the full course overview by submitting your details below

PLC City & Guilds Training Courses

books

Essential Book supplied *throughout* course!

17th edition course

First exam fee included!

Please do not confuse us with cheap imitation courses, we offer first class PRACTICAL training using state of the art PLC systems and the latest software. These PLC’s have been carefully selected to match the latest current trends in industry, to match what industry is using. We DO NOT use simulator software, our training is very much hands on, allowing you the confidence when completing the course to work in the real world. You cannot gain this with simulators. Presently 90% of the industry run with either Allen Bradley or Siemens S7 PLC’s.. Why learn on something which isn’t used in the real world? Don’t get ridiculed in the real world, by having unusable theoretical skills. ALL our trainers are industry leaders, who are time served, experienced and highly qualified in the subject field, with a minimum of 20 years each in the industry. We can accommodate most makes of PLC’s, however, if you are new to the industry, we would HIGHLY recommend learning on the major players first using real PLC’s, real software and real training rigs.

We are the ONLY accredited centre to also offer industry recognised, City & Guilds qualifications in PLC, which is run in tandem to the EAL qualification. We are ISO 9001, ISO 14001 and OSHAS 18001 approved.  This is testament to our ongoing investment and the quality of training we provide.

For the best PLC Training in the UK -Please before you book a course, give us a call on 0800 112 3310, come and take a look around our superb centres or listen to what the industry says about us. 

BOOK YOUR COURSE BELOW

£925.00 + VAT (£1,110.00 inc VAT & all fees)

cngaccr

 

 

 

Now comes with our brand new, extra accreditation at no extra cost!

City & Guilds – Programmable Logic Controllers – UK’s first City & Guilds total accreditation!

Course Duration:

5 Days

Pre-Requisites

None

What is Obtained/Achieved?

  • City & Guilds – Programmable Logic Controllers

Course Reviews

good course and elliot the trainer has alot of knowledge to help
ryan m 19/01/2024
Nothing to say. The course was what I expected and everyone was helpful
Jack S 19/01/2024
  • 25
    Mar 2024
    4 days, 08:30 AM - 04:30 PM
  • 08
    Apr 2024
    5 days, 09:30 AM - 04:30 PM
  • 07
    May 2024
    4 days, 08:30 AM - 04:30 PM
  • 20
    May 2024
    5 days, 09:30 AM - 04:30 PM
  • 03
    Jun 2024
    5 days, 09:30 AM - 04:30 PM
  • 17
    Jun 2024
    5 days, 09:30 AM - 04:30 PM
  • 01
    Jul 2024
    5 days, 09:30 AM - 04:30 PM
  • 15
    Jul 2024
    5 days, 09:30 AM - 04:30 PM
  • 29
    Jul 2024
    5 days, 09:30 AM - 04:30 PM
  • 12
    Aug 2024
    5 days, 09:30 AM - 04:30 PM
  • 27
    Aug 2024
    4 days, 08:30 AM - 04:30 PM
  • 23
    Sep 2024
    5 days, 09:30 AM - 04:30 PM
  • 23
    Sep 2024
    5 days, 09:30 AM - 04:30 PM
  • 07
    Oct 2024
    5 days, 09:30 AM - 04:30 PM
  • 21
    Oct 2024
    5 days, 09:30 AM - 04:30 PM
  • 04
    Nov 2024
    5 days, 09:30 AM - 04:30 PM
  • 18
    Nov 2024
    5 days, 09:30 AM - 04:30 PM
  • 02
    Dec 2024
    5 days, 09:30 AM - 04:30 PM
  • 16
    Dec 2024
    5 days, 09:30 AM - 04:30 PM
TOP

WORLD CUP 2018 - BOOK NOW AND CHOOSE THE WINNING TEAM TO BE IN WITH A CHANCE TO WIN A £300 GIFT VOUCHER!* *Unavailable to ELCAS bookings