The Total EAL Inspection and Testing Level 3 package.
The objective of this course is to provide you with an understanding of the practices/theory involved in the initial verification and commissioning of electrical installations and will cover both single and three phase systems.
This EAL Combined 4337 and 4338 electrical course is ideal for people with limited experience of initial inspection, testing and verification and/or periodic inspection and testing of electrical installations. If you already work as an Electrician, but have not carried out inspection and testing since qualifying, or you require to update before moving onto other qualifications, then this may be the course for you.
The objective of the course is to give you a good understanding of the theory/practices required to do both a periodic inspection and initial verification/commissioning of electrical installations. The course will improve both your inspection/testing and periodic skills.
- Introduction to qualification
- Initial verification
- Inspection of installations
- Safe isolation and testing
- Dead and live testing
- System safety
- Complete safe isolation
- Inspection and testing requirements
- Completion of periodic inspection
- Contrast of initial verification and periodic inspection
- Test results interpretation
- Completion of EICR reports
- Dead and live testing
You will complete an EAL online multiple choice exams. The online exam is open book (Guidance Note 3 Only) so you will be able to take your course book into the exam with you.
The Practical assessments will be:
Practical Assessment with the date to be arranged after completion of the course
- Three phase installation commissioning assessment
- Earth loop impedance testing assessment
- Insulation resistance testing assessment
- Initial inspection assessment
- Periodic inspection assessment
- Periodic inspection and testing assessment
|City & Guilds 2391-50/2391-51||EAL 4337/4338|
|On-screen exam/s||(open book (BS 7671, Guidance Note 3, On-Site Guide) – multiple choice) 2391-50 & 23951-50 (same exam – only required to complete once) (1 hour and 20 mins)||(open book (Guidance Note 3 only) – 4 answer options and advanced question types) 2 exams – QIT3001 (1 hour and 30 mins) & QCR3001 (1 hour)|
|Dated written exam||(open book) 2391-50 (2 hours)||n/a|
|Dated written exam||(open book) 2391-51 (2 hours)||n/a|
|Practical Assessment||2391-50 and 2391-51 Practical||Practical|
Our Tutors are qualified, highly experienced, enthusiastic, knowledgeable and extremely friendly, you can take full advantage of all the tips of the trade, personal experiences and practical advice they offer. This short theory course is intensive, but no compromise is made on the course content. The atmosphere is relaxed and enjoyable which creates a good learning environment.