PLC 15

PLC 15 – Course Description:

We have an extensive range of PLC 15 training courses available covering all PLC manufacturers and levels of expertise from the complete novice to the advanced. ALL of our PLC 15 training courses can be tailored to your own requirements.

ALL our PLC 15 courses will be based on the relevant software and hardware. We aim to make ALL our courses as practical as possible, leading to ‘real world’ skills and not just theoretical skills.

We cover a wide range of manufacturers including :

  • Siemens Step 5 PLC Training (Using Step 5, Quadriga or Others)
  • Allen Bradley PLC 3; 5 Training (AB6200 Software)
  • RSLogix 5 PLC Training
  • SLC PLC Training (RSLogix 500)
  • ControlLogix PLC Training (RS Logix5000)
  • MicroLogix PLC Training (RSLogix 500)
  • S7-200 PLC Training (Step 7 Micro)
  • S7-300 PLC Training (Step 7)
  • S7-400 PLC Training (Step 7)
  • Kuhnke PLC Training (Kubes)
  • Omron PLC Training (Syswin)
  • Modicon PLC Training (ProWorx and Others)
  • Mitsubishi PLC Training (Medoc, GX Developer, GPP & Others)
  • Toshiba PLC Training
  • GE Fanuc PLC Training
  • Telemecanique PLC Training
  • Most other PLC manufacturer training undertaken.

We also cover a wide range of SCADA Systems to enable engineers to modify and add to existing screens, fault find through systems, set up communications etc. This is covered separately on our SCADA courses –

Please do not confuse us with cheap imitation courses, we offer first class PRACTICAL training using state of the art PLC systems and the latest software. These PLC’s have been carefully selected to match the latest current trends in industry, to match what industry is using. We DO NOT use simulator software, our training is very much hands on, allowing you the confidence when completing the course to work in the real world. You cannot gain this with simulators. Presently 90% of the industry run with either Allen Bradley or Siemens S7 PLC’s.. Why learn on something which isn’t used in the real world? Don’t get ridiculed in the real world, by having unusable theoretical skills. ALL our trainers are industry leaders, who are time served, experienced and highly qualified in the subject field, with a minimum of 20 years each in the industry. We can accommodate most makes of PLC’s, however, if you are new to the industry, we would HIGHLY recommend learning on the major players first using real PLC’s, real software and real training rigs.

We are the ONLY accredited centre to also offer industry recognised, City & Guilds qualifications in PLC, which is run in tandem to the EAL qualification. We are ISO 9001, ISO 14001 and OSHAS 18001 approved. This is testament to our ongoing investment and the quality of training we provide.

Please before you book a course, give us a call on 0800 112 3310, come and take a look around our superb centres or listen to what the industry says about us. 

Level 3 Certification

To achieve certification, candidates must be able to:

  • Demonstrate an Understanding of the Internal Architecture of PLCs, their Applications and Knowledge of the Number Systems they use.
  • Demonstrate an Understanding of Typical Input and Output Devices used with PLCs, their Selection and how they are Interfaced to the PLC.
  • Investigate and Display an Understanding of the Basic Programming Techniques used with PLCs.
  • Produce a Correctly Developed Program for a PLC to Control a Specified Process and Document the Completed Program to a Satisfactory Standard.
  • Demonstrate an Understanding of How to Monitor PLC Operation, Force Devices and Fault Find PLC Controlled Processes.

With ALL our courses we offer unbiased technical support and access to a wealth of knowledge and information upon completion. Once you’ve completed your course with Technique, you can be assured that our service doesn’t end there…

City & Guilds 2391-52 Combined Course

The new Testing and Inspection City and Guilds Combined Course qualification replace and improve on the former 2394 & 2395 that was previously available to electricians but has since been withdrawn.

  • 2391-52 – Level 3 Award in the Periodic Inspection, Testing and Certification of Electrical Installations. The syllabus for this aims to cover period inspection and testing of existing installations to ensure they remain safe and efficient.
  • The combined City and Guilds 2391-52 course runs over five consecutive days, the first three days covering fundamental theory.
  • The fourth day covering Initial Verification practical and revision.
  • The fifth day of the City and Guilds 2391-52 course covering Periodic Inspection practical and revision and a 2 hour Open Book Multiple Choice online exam will be sat.
PLC 15 Training Course

books

Essential Book supplied *throughout* course!

17th edition course

First exam fee included!

The Tutors:

Our Tutors are qualified, highly experienced, enthusiastic, knowledgeable and  extremely friendly, you can take full advantage of all the tips of the trade, personal experiences and practical advice they offer. This short theory course is intensive, but no compromise is made on the course content.  The atmosphere is relaxed and enjoyable which creates a good learning environment.

Course Overview

Receive the full course overview by submitting your details below

BOOK YOUR COURSE BELOW

£2,200.00 + VAT (£2,640.00 inc VAT & all fees)

cngaccr

Now comes with our brand new, extra accreditation at no extra cost!

City & Guilds – Programmable Logic Controllers – UK’s first City & Guilds total accreditation!

Course Duration:

15 Days
Please note the course dates may not run consecutively.
We will be in touch to confirm subsequent dates on this package course after registration.
Please get in touch if you would like to discuss the exact course dates for each module.

Pre-Requisites

It is essential you have a good understanding of BS7671 IET Building Regulations. The course is intended for installers who have a clear understanding of electrical principles and practices of electrical installations. Essentially you will have worked in the electrical industry with an understanding of 3 phase systems.

What is Obtained/Achieved?

  • Level 3 EAL award in Programmable Logic Controllers
  • City & Guilds – Programmable Logic Controllers
  • City & Guilds – 2391-52 Inspection and Testing
  • 25
    Mar 2024
  • 08
    Apr 2024
  • 07
    May 2024
  • 20
    May 2024
  • 03
    Jun 2024
  • 17
    Jun 2024
  • 01
    Jul 2024
  • 15
    Jul 2024
  • 29
    Jul 2024
  • 12
    Aug 2024
  • 27
    Aug 2024
  • 23
    Sep 2024
  • 23
    Sep 2024
  • 07
    Oct 2024
  • 21
    Oct 2024
  • 04
    Nov 2024
  • 18
    Nov 2024
  • 02
    Dec 2024
  • 16
    Dec 2024
TOP

WORLD CUP 2018 - BOOK NOW AND CHOOSE THE WINNING TEAM TO BE IN WITH A CHANCE TO WIN A £300 GIFT VOUCHER!* *Unavailable to ELCAS bookings