{"id":29093,"date":"2019-09-12T15:49:30","date_gmt":"2019-09-12T14:49:30","guid":{"rendered":"http:\/\/learntechnique.com\/?page_id=29093"},"modified":"2022-07-22T11:58:00","modified_gmt":"2022-07-22T10:58:00","slug":"industrial-electrical-maintenance-part-2-module-5","status":"publish","type":"page","link":"https:\/\/learntechnique.com\/electrician-courses\/industrial-electrical-maintenance-part-2-module-5\/","title":{"rendered":"Industrial Electrical Maintenance Part 2 \u2013 Module 5"},"content":{"rendered":"

[vc_row][vc_column width=”2\/3″][vc_column_text]\n

Industrial Electrical Maintenance Part 2 – Module 5: Course Description<\/h2>\n
Day 1<\/strong><\/p>\n
\n
Solenoids and actuators, principles of operation and maintenance<\/li>\n
State precautions that may be necessary when removing cores from energised AC solenoids<\/li>\n
Transformers, sizing, applications and uses<\/li>\n
Heaters, applications, uses and safety precautions to be observed<\/li>\n
Temperature controllers, various types, principles of operation and uses<\/li>\n
Thermal sensors, various types, principles of operation and uses.<\/li>\n<\/ul>\n
Day 2<\/strong><\/p>\n
\n
Proximity devices, limit switches and proximity switches, various types, principles of operation and uses<\/li>\n
Practical workshop, gaining an understanding of typical connections of various proximity devices and the range<\/li>\n
of available supplies catered for, voltage levels and current type<\/li>\n
Development of a typical simple control system using push buttons, proximity devices, relays and indicator<\/li>\n
lamps.<\/li>\n<\/ul>\n
Day 3<\/strong><\/p>\n
\n
Protection against overcurrent<\/li>\n
Protective devices, various types, suitability and uses<\/li>\n
Earthing, including principles of protection against indirect shock<\/li>\n
Undervoltage protection.<\/li>\n<\/ul>\n
Day 4<\/strong><\/p>\n
\n
Cable and core termination techniques, including crimping and soldering<\/li>\n
Practical workshop terminating YY, SY, SWA and MICC cable<\/li>\n
Testing, basic principles of circuit protective conductor testing and insulation resistance testing, instruments<\/li>\n
used and expected values<\/li>\n
Practical workshop testing cables terminated previously and testing cables with faults on test rig.<\/li>\n<\/ul>\n
Day 5<\/strong><\/p>\n
\n
Fault finding, safety precautions and principles<\/li>\n
Practical workshop on fault rigs<\/li>\n
Root cause analysis<\/li>\n
PPM and maximising uptime<\/li>\n<\/ul>\n
Course Overview<\/h3>\n
Receive the full course overview by submitting your details below<\/p>\n