Total Air Conditioning and Refrigeration 15

Total Air Conditioning and Refrigeration training: Course Description

Our intensive 10, 15 or 20 day Total Air Conditioning and Refrigeration training courses have been structured to meet the ever increasing demands on industry to meet safety, environmental and legal requirements regarding installation, commissioning, service and maintenance of both refrigeration and air conditioning systems including the electrical aspects of installation dependent upon course selection. The first 10 days of the Total Air Conditioning and Refrigeration training course are mechanical only, the following 5 or 10 days are the electrical aspects, depending on which route you need to go down.

The Total Air Conditioning and Refrigeration training courses are accredited with the City & Guilds 2079, Pipework and Brazing – (commercial), along with Flammables.

Our Total Air Conditioning and Refrigeration training courses are designed to be as practical as they possibly can be, with workshop time taking more than 70% of the course.

During the Total Air Conditioning and Refrigeration training course, you will, install, repair, fault find, adapt and commission on a variety of different equipment, because we believe the way to learn is to do it!!

With ALL our courses we offer unbiased technical support and access to a wealth of knowledge and information upon completion. Once you’ve completed your course with Technique, you can be assured that our service doesn’t end there…

Total Air Conditioning and Refrigeration Course – 10 Days

Sufficient skills, knowledge and techniques to install, pressure test, leak test, evacuate, dehydrate and commission typical air-conditioning units in accordance with the regulations and industry good practice. Also you will gain the ability to be able to maintain, install and repair refrigeration plant.

• Single stage refrigeration systems
• Domestic refrigeration systems
• Various types of commercial refrigeration systems
• Various types of industrial refrigeration systems
• Performance characteristics
• Plant operating conditions

On completion of the 10 day course, candidates will understand the operation of a simple system and be able to carry out diagnostic, installation and repair work. The following qualifications will be undertaken during the course.

What will be gained in the 10 Day Course?

Refrigeration Electrics Maintenance Course – 5 Days

Overview

Prior to course commencement you will be provided with the necessary pre-course reading material which includes section reviews to check your understanding. During the five days you will work through electrical principles, the applicable wiring regulations and refrigeration electrical component identification, functionality and testing.

What will be gained in the extra 5 days?

• Construction Skills (City & Guilds) – Essential Electrics Module
• Construction Skills (City & Guilds) – Refrigeration Electrics Module
• City and Guilds 2382-22 Level 3 – 18th Edition Wiring Regulations

Total Air Conditioning & Refrigeration: A typical day in the one of our Practical Workshops!

The Tutors:

Our Tutors are qualified, highly experienced, enthusiastic, knowledgeable and  extremely friendly, you can take full advantage of all the tips of the trade, personal experiences and practical advice they offer. This short theory course is intensive, but no compromise is made on the course content.  The atmosphere is relaxed and enjoyable which creates a good learning environment.

Course Overview

Receive the full course overview by submitting your details below

BOOK YOUR COURSE BELOW