TIEM
ind1ind9ind8ind7ind6ind5ind4ind3ind2

Total Industrial Electrical Maintenance 15

£2,045.00 + VAT (£2,454.00inc VAT & all fees)

Funding Options Available

cngaccr

Now comes with our brand new, extra accreditation at no extra cost!

City & Guilds – Fundamental Electrical Principles for Industrial Practices  – UK’s first City & Guilds total accreditation!

Course Duration:

15 Days

Pre-Requisites

  • Understanding of Basic Electrical Principles

What is Obtained/Achieved?

  • Level 3 EAL Unit* – Industrial Electrical Maintenance
  • City & Guilds – Fundamental Electrical Principles and Practices for Industrial Practices
  • City & Guilds 2392 – Fundamental Inspection & Testing
  • City & guilds 2394 – Initial Verification

  • *Choose Course Location First:

    Please choose a course location and then the available dates will appear below

    * 

Category:

Industrial electrical maintenance – Course Description:

This industrial electrical maintenance course is designed to enable candidates who have a small amount of electrical knowledge to gain recognised qualifications and skills to enable them to enter an industrial environment and work as a industrial electrician. The industrial electrical maintenance course will include a large amount of practical, enabling the candidate to install, fault find, design and wiring up control panels, using a variety of different methods.

Industrial electrical maintenance course Aims

The aim of the industrial electrical maintenance course is to provide solid foundations upon which the participant will be able to build and develop. Emphasis is given to providing the necessary skills, which will allow the participant to carry out routine electrical tasks. It is also made clear that a participant needs to identify and know their own limitations, allowing tasks to be carried out in a safe manner, not giving rise to danger.

• Electricity at Work Regulations 1989, requirements and implementation • Working safely, including the importance of isolation procedures and lock out systems • Switches and Push Buttons, an explanation of the various types of switches and push buttons, the terminology and electrical symbols which are used in industry today, along with practical testing of functionality • Relays and Contractors, principles of operation, purpose and uses • Circuit design using BS electrical symbols and ladder diagrams, simple retaining circuits • Construction of the above circuit, demonstrating the techniques of cable termination.

• 3 phase induction motors, synchronous and asynchronous • Description of the component parts of a 3 phase induction motor • Demonstration of how a 3 phase rotating magnetic field is produced and how to reverse it • Explanation of synchronous and asynchronous speed and slip • Effect of the number of poles on motor speed • Frame sizes• Practical identification of various motors.

• Principles of 3 phase induction motor control systems • Overload protection principles of operation and use • Design and operation of a DOL (direct on line) starter • Construction of a DOL starter • Inspection and testing procedure for the above starter • Motor testing procedures.

• DOL starter modifications • Importance of updating documentation • Design, construction and verification of reversing starter control and power circuits.

• Star delta starters, principles of operation and uses • Design, construction and verification of star delta starter control and power circuits.

• Solenoids and actuators, principles of operation and maintenance

  • State precautions that may be necessary when removing cores from energised AC solenoids
  • Transformers, sizing, applications and uses
  • Heaters, applications, uses and safety precautions to be observed
  • Temperature controllers, various types, principles of operation and uses

• Thermal sensors, various types, principles of operation and uses.

Proximity devices, limit switches and proximity switches, various types, principles of operation and uses

  • Practical workshop, gaining an understanding of typical connections of various proximity devices and the range

of available supplies catered for, voltage levels and current type

• Development of a typical simple control system using push buttons, proximity devices, relays and indicator lamps.

• Protection against over current

  • Protective devices, various types, suitability and uses
  • Earthing, including principles of protection against indirect shock

• Undervoltage protection.

• Cable and core termination techniques, including crimping and soldering

  • Practical workshop terminating YY, SY, SWA and MICC cable
  • Testing, basic principles of circuit protective conductor testing and insulation resistance testing, instruments used and expected values

• Practical workshop testing cables terminated previously and testing cables with faults on test rig

• Fault finding, safety precautions and principles

  • Practical workshop on fault rigs
  • Root cause analysis
  • PPM and maximising uptime.•

Level 3 Certification

Level 3 National Certification is included with the first 10 days of the course, it enables the Candidate to identify the principles applied to, the processes involved and the components used in the construction of Electrical Panels for Engineering Applications and, the techniques used in inspection, testing and commissioning of electrical panels and associated equipment. You will gain knowledge and be assessed in the following areas.

  • Understand the relevant statutory and non-statutory legislation associated with design, construction and application of Electro Technical Panels;
  • Understand safe systems of working on Electro Technical Panels;
  • Understand how to interpret drawings, diagrams, specifications and manufacturers data to locate, position, install and connect wiring systems, components, wiring enclosures and equipment;
  • Understand how to select the appropriate tools and equipment to carry out the panel build;
  • Understand how to interpret drawings, diagrams, specifications and manufacturers’ data and to select

appropriate working methods and procedures using tools, equipment and instruments to refurbish, maintain and repair electro technical panels;

  • Understand how to select appropriate working methods and use tools, equipment and instruments for the testing and commissioning of electro technical panels.

2392 Description

A short course aimed at newcomers to inspection and testing of electrical installations, who possibly require certification to demonstrate technical knowledge and practical ability for entry into a Part P competent person’s scheme and also the logical route towards 2391-10.

City and Guilds Certification is achieved on successful completion of both the practical assessment and PC based examination.

A four day Industrial Electrical Maintenance 15 course for a student possessing a working knowledge of the wiring regulations, to the level of City and Guilds 2382.

2394 Description

The City and Guilds 2394 electrical course has been designed to meet the needs of the electrical installation industry, and is aimed at practicing electricians who have not carried out inspection and testing since qualifying or who require some update of training before going on to other City and Guilds qualifications.

Candidates who achieve the 2394 qualification could progress on to the City and Guilds 2395: the Level 3 Certificate in Inspection, Testing and Certification of Electrical Installations.

The City and Guilds 2394 course will focus on the teaching and learning of initial verification and certification of electrical installations.

Summary

After completion of the 2 weeks of industrial electrical maintenance training, the candidate will have obtained a Level 3 qualification, within the electrical wiring sector, this qualification is ideally suited for a candidate wishing to enter the Industrial Maintenance Electrical environment.

The Tutors:

Our Tutors are qualified, highly experienced, enthusiastic, knowledgeable and extremely friendly, you can take full advantage of all the tips of the trade, personal experiences and practical advice they offer. This short theory course is intensive, but no compromise is made on the course content. The atmosphere is relaxed and enjoyable which creates a good learning environment.

Course Downloads

lunch

Lunch Included!

refresh
Refreshments supplied throughout the day!

industrial electrical maintenance

First exam fee included!

books

Essential Book supplied *throughout* course!

* Actual Unit Title is – Panel Wiring for Engineering Applications

TOP